- BPA free
- Low odour
- UV stable
- Low viscosity
- Renewable sourced ingredients
- Smooth, glossy or matt (with additives)
- Self-levelling and seamless overcoat
- Hard cure
- Confined space use and earlier site re-entry
- UV stability and yellowing resistance
- Pourable/spreadable liquid
- Green building material
- High surface finish, easy to clean
- Easy to use
- Corrosion and abrasion resistant
- Colour and texture
Mixing – Pre-measured hardener provided in Part B is added to the contents of Part A and mixed thoroughly using a manual paint mixer or low revolution mechanical mixer for at least 5 minutes scraping all surfaces of the container to ensure compete mixing. Allow the reaction to start before application, usually within 15 minutes depending on ambient temperature.
Note: All ingredients must be mixed to achieve maximum hardness When the Part B hardener is added, it reacts with the pre-resin (Part A). The reaction generates heat so should not be left unattended while curing and used within 1 hour.
This product has been formulated to achieve maximum resin hardness and is not intended to be sub-divided.
Application – Prepared material should be applied with a suitable brush or roller.
Cleaning – Remove from tools and equipment with acetone or mineral turpentine immediately after use. Tacky surfaces can be cleaned with mentholated spirits and cured material can only be removed mechanically.
Personal Protective equipment – Wear appropriate eyeglasses or chemical safety goggles, gloves to prevent skin exposure, appropriate clothing to prevent skin exposure and respirator when necessary.