The Performance Alaia Surfboard by Surfing Green


or 4 fortnightly payments of $99.75 with Afterpay More info

The parabolic tail shape of the Performance Model was used in ancient Hawaiian Alaia designs and is designed for high performance surfing in fast or hollower waves.


The Alaia is a finless, thin wooden surfboard with hardly any rocker which was ridden by the ancient Hawaiians.

The Performance Model

The performance model is designed for high performance surfing in fast or hollower waves and will surf well in the pocket and carve on steep faces. The parabolic tail shape was used in ancient Hawaiian Alaia designs and really helps the tail bite into the face of the wave like a fin on a normal board. Combined with the concave it makes the Alaia much easier to control in steeper waves.


Surfing the Alaia – fast and fun!

Without fins and being nice and flat, these boards like to trim and go fast. While it takes a little practice to get the hang of turning, you will be surprised how maneuverable and responsive these boards are. Sliding turns, 360° spins, speed in the tube and never-ending floaters!

How’s it done?

Rails – the hard, sharp edge on the bottom of the rail holds the board and gives it bite in turns.

Thickness – The thin board flexes enormously and creates drive and responsiveness through turns. The flex in the board is phenomenal and you can feel it under you feet as you turn on the wave.

Bottom contours – the smooth, single concave runs from the tail at least 2/3 the way up the board and increases control under the back foot and prevents sliding out too much. The gentle roll from the stringer line to the rails makes for smooth transitions through turns.

Nose– the scooped nose helps prevent nose-diving on steeper waves and pearling through turns.

Width – the ideal width of an Alaia is 16-17”. Any wider and it becomes very slippery, any thinner and it’s too hard to paddle.

Length – 6 – 7ft is the ideal length of an Alaia. Lighter, smaller and more advanced surfers should look for something from 6 – 6’6”. Heavier, taller and less advanced surfers should look towards 6’6” – 7ft for a board with bit more paddle power.

Weight – finished boards generally end up between 2.5 – 3.7kg.

Materials – we use only Australian-grown Paulownia wood for our Alaias. Paulownia is an incredibly light hardwood with great water and rot-resistant qualities. All boards are handshaped and then sealed with liquid lanolin – straight from the sheep’s back! Lanolin acts as the best water resistant coating you can apply to a wood board as an alternative to glassing. It will keep your board water resistant for months and once it’s in the water it is actually sticky so you don’t need to cover your beautiful wood board with wax. Just unwrap it (recycle the packaging of course) and go surfing!

Premium Alaias are shaped using our highest grade Paulownia timber blanks. The timber is selected by hand and the result is a beautiful, symmetrical timber blank that is made up of 5 even pieces of high grade Paulownia giving you that “premium” finished look.

The boards are guaranteed – if your board breaks due to a fault in the blank within 12 months, we will replace it at no cost to you.

Custom orders are also available if you would like a particular shape or size.

Freight – these boards can be sent anywhere in the world. Boards are wrapped in a layer of bubble wrap, then cardboard and are fully insured during freight.


Additional information

Weight8 kg
Dimensions200 × 50 × 3 cm


There are no reviews yet.

Be the first to review “The Performance Alaia Surfboard by Surfing Green”

Your email address will not be published. Required fields are marked *