CNC Cut Hollow Wood Surfboard Kits (Longboards)

Ever wanted to build your own hollow wood surfboard? This kit makes a light, strong and perfectly shaped frame and comes with complete step-by-step instructions.

$205.00 — $230.00

If you want to build a perfect board, you have to start with a perfect frame! These kits are CNC cut to absolute precision, making your board building experience much more efficient and much less stressful. This kit makes a light, strong, perfectly shaped frame with complete step by step instructions. $40 shipping Australia wide and internationally! We are now also supplying Paulownia strip planking which is suitable to complete the deck, bottom and rails of these boards. Check the packs out here.

The CNC kit includes:

  • CNC Cut Ribs
  • PDF Assembly Manual (emailed)
  • Bioplastic Vented Leash Plug ($21.95 value)
  • Spar
  • Titebond III Ultimate Wood Glue 473ml ($19.95 value)

You will need to provide – wood for deck and bottom, fibreglass and resin.

For more information check out the FAQ page here.
To read about the process of making a hollow wooden surfboard with this kit, click here.

Longboard Kits are available in the following sizes:

“The Cruiser” Classic longboard with its roots in the ’60s.  Build it with retro 50-50 rails for that sweet paddling nostalgic feel or harden them up with modern
contour that turns on a dime and hugs a wave tight. Its got just enough rocker to be forgiving on late takeoffs but still has speed down the line. Be prepared
to spend some serious nose time with this board.

9’ 6” Longboard
Width – 22 1/2 in.
Nose – 17 in.
Tail – 14 1/2 in.
Thickness – 3 in.

$205.00

“The Gordo” catches waves easily and is stable enough to be used as a smaller Stand Up Paddle board (SUP). But just because its big doesn’t mean
it’s clumsy.  The rails have been pinched slightly to give it agility and performance.

10’ 0” Longboard
Finished Length – 10’ 0”
Width – 23 1/2 in.
Nose – 18 in.
Tail – 15 1/2 in.
Thickness – 3 3/8 in.

$230.00

“The Muy Gordo” has the same basic measurements as the Gordo, its just a little more volume.  And more volume means better flotation. Catches waves easily and can even be used as a smaller Stand Up Paddlenpard. You’ll catch waves easier than you knew was possible.

10’ 0” Longboard
Finished Length – 10’ 0”
Width – 23 1/2 in.
Nose – 18 in.
Tail – 15 1/2 in.
Thickness – 3 3/8 in.

$230.00

Freight: Orders are usually received within 2 weeks. Please select “standard shipping” on checkout to ensure you are charged the correct freight amount.